SPECTRUM ANALYZER SM5011

Features:

• SM5011 spectrum analyzer is used for the early test in the development of electrical products, troubleshooting of CATV/MATV system as well as the test and trouble diagnosis of cellular phone/paging systems. Combined with the near field probes of Mz530, it can detect the missing fields of radio frequency
• SM5011 is equipped with a tracing signal generator, and in the combined use of spectrum analyzer/tracing signal generator, it can complete the work which cannot be done by other frequency sweep system, such as sweep generator/network analyzer, sweep generator/spectrum analyzer, and sweep generator/oscilloscope, etc..

Input frequency response

0.15-1050MHz, 3dB

Display accuracy of
central frequency

+/-200KHz (frequency sweep width +200KHz)

Accuracy of mark frequency

+/-0.1% (frequency sweep width +100KHz)

Frequency display resolution

100KHz (4½ bit LED display)

Frequency sweep width

0.1MHz/div-100KHz/div with 1, 2 and 5 step system
And 0Hz/div (0 frequency sweep) Accuracy: +/-10% (each range)

Intermediate frequency bandwidth

20KHz and 400KHz

Video filter

(When on) 4KHz

Amplitude range

-107~+13dB

Reference level

-27dB~+13dB (10dB for every step) +/-2dB

Average noise level

-97dB(20KHz intermediate frequency width)

Display range of CRT screen

80 dB(10dB/div)

Display range of vertical display

+/-2dB (2 With attenuator) 250MHz signal

Input attenuator

0-40dB (4x10dB step) error: +/-1dB/10dB

Maximum input level

+10dBm,+25V DC(Input attenuator set at 0dB)
+20dBm (input attenuator set at 40dB)

Frequency stability

Over 150KHz/hour

Input jack type

BNC

Input impedance

50Ω

Power supply

220V/110V; +/-10%; 50Hz/60Hz

Tracing signal generator

Input frequency response

0.15-1050MHz, 3dB

Output level range

-50~+1dBm (4x10dB) +/-3dB

Output attenuator

0-40dB (4x10dB step) error: +/-1dB/10dB

Input jack type

BNC

Input impedance

50Ω

Others

DC output

+6V (for probe)

AM demodulation output

Load impedance ≥16Ω